Quality Identification Of Socks

1. Choice of types: The main products sold in the market are chemical fiber socks (nylon, card silk, thin elastic, etc.), cotton socks and blended, interwoven, wool, and silk socks. According to the season and the nature of the feet, usually choose nylon socks and towel socks in winter; sweaty feet, cracked feet, choose cotton or blended, interlaced socks; in summer, wear stretch card stockings, real stockings, etc.; spring and autumn should wear thin elastic and mesh socks. Women's skirts should wear stockings.

2. Size selection: The size of the socks is based on the size of the bottom of the socks (referring to the part from the heel to the toe) as the standard. The general size is indicated on the trademark. It is better to choose the same size or a slightly larger size according to the length of the foot, not a smaller one.

3. Quality selection: According to the internal quality and appearance quality, socks are divided into first-class, second-class, third-class (all qualified products) and foreign-class products. Generally, first-class products are used, and second-class and third-class products can also be selected when the requirements are not high.

4. Selection of key parts: I) The selected socks and sock heels should be large and bag-shaped, as close as possible to the shape of human feet. The size of the heel of the sock will cause the sock tube to sag after wearing and the sock heel slips to the bottom of the sock. You can't try it on when you buy, just fold the sock surface and the bottom of the sock in half from the center line. Generally, the ratio of the sock surface to the heel is 2:3. II) Inspection of the density and elasticity of the sock mouth: the sock mouth should have a high density, double the width of the sock, and good recovery. It has small elasticity and is not easy to reset horizontally, which is also one of the reasons for the sliding of socks. III) Check whether the seam head interface is out of needle. Generally, sewing the head of socks is another process. If the stitches are removed from sewing, the mouth will open when worn. When selecting, look carefully from the seam head to see if the needle is smoothly released. IV). Check for holes and broken wires. Because socks are knitwear, they have a certain degree of extensibility and elasticity. Generally, broken wires and small holes are not easy to find. According to the conditions of the process, it is easy to cause broken wires or holes when the sock is shaped into contact with other objects. Therefore, check the sock bottom and sock side of the sock when purchasing, and lightly pull it horizontally. V). Check the length of socks. Because each pair of socks is optional, unequal length is likely to appear. Generally, each pair of first-class products should be no more than 0.5cm.

5. Identification of regular products and miscellaneous inferior products: Large sock factories have advanced equipment, stable technology, and good selection of raw materials. Through various procedures, the quality is stable. It is shown in appearance. The fabric density is uniform, thick, pure color, and shaped. Well, there is a formal trademark. Miscellaneous inferior products are mostly due to simple equipment, manual operation, poor selection of raw materials, thin and uneven fabrics, low density, less color and luster, many defects, poor molding, and no formal trademarks.